ARDUIO
http://www.arduino.cc/
https://www.sparkfun.com/search/results?term=gas+sensor
Contents
ideas
http://hwstartup.wordpress.com/
keyboard
http://www.codeproject.com/Articles/710475/Using-matrix-keypad-with-Arduino
2.4Ghz
https://arduino-info.wikispaces.com/Nrf24L01-Info
http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01P
http://arduino.cc/forum/index.php/topic,62222.0.html
http://maniacbug.github.com/RF24/index.html
GSM
https://www.circuitsathome.com/mcu/programming/interfacing-arduino-to-a-cellular-phone
cell id =
?mcc=244&mnc=121&lac=502&cellid=5148
http://developer.android.com/reference/android/telephony/gsm/GsmCellLocation.html#getCid%28%29
https://stackoverflow.com/questions/7240038/utran-cell-identity-returned-by-getcid
http://www.minigps.net/map.html
http://wiki.opencellid.org/
http://www.gpslocalizador.es/index.php/soporte.html
SENSORS
http://www.instructables.com/id/Use-your-android-phone-sensors-on-the-arduino-/
Temperature http://playground.arduino.cc/Learning/OneWire
gyro: http://playground.arduino.cc/Main/MPU-6050
http://www.invensense.com/mems/gyro/mpu6050.html
Linux
https://wiki.archlinux.org/index.php/arduino
Bluetooth:
http://homepages.ihug.com.au/~npyner/Arduino/GUIDE_2BT.pdf
433
http://code.google.com/p/rc-switch/
http://www.wes.id.au/2013/07/decoding-and-sending-433mhz-rf-codes-with-arduino-and-rc-switch/
https://code.google.com/p/rc-switch/
IR
http://playground.arduino.cc/Main/IRLib
http://arduino-info.wikispaces.com/IR-RemoteControl
Time
http://playground.arduino.cc/Code/Time#.UzVmHqYX5CM
http://arduino.cc/en/Tutorial/UdpNtpClient
NTP server
power save
http://playground.arduino.cc/Learning/arduinoSleepCode#.UzVn06YX5CM
GPS
http://code.google.com/p/ardupirates/wiki/UbloxGPSTutorial
Programing Cable
Features: USB TO RS232 TTL PL2303HX Auto Converter Module Adapter 5V Output, provides the best and convenient way to connect your RS232 TTL devices or DEMO BRD. To your computer, via the usb port.
Specification: Built-in TTL COM PC-PL2303HX Chip Standard USB type A male and TTL 4 pin connector Cable length: 1000mm (39 3/8 in) Simple and Easy way to give USB support to your designs Available for Linux, Mac, WinCE and Windows (XP, 2003), Vista, Win 7 Black cable-----GND Green cable----TXD White cable----RXD Red cable ---- VCC (5V) PL2303 Windows Driver Download
Connection method: Brush requires only three lines, generally used only three signal lines RX TX GND, VCC.
Note: After setting 3.3V and 5.0V output (this is To the microcontroller power supply, no need to upgrade the machine) please put the small plate unplug from the computer, set the jumper to take, do not charged to avoid damage to the device.
Package Included: 1x USB to RS232/TTL PL2303HX Cable Adapter Module
AIS
http://www.oz9aec.net/index.php/gnu-radio-blog/482-a-2-channel-ais-receiver-using-rtl-sdr-and-gnuais
http://gnuais.sourceforge.net/
